Acrylgel Pana Cotta 30g

Acrylgel Pana Cotta 30g

20.00

3 in stock

The dense acrylic gel allows smooth and precise application, does not run off or flood the cuticles, and the soft consistency moulds easily under the brush

 

 

Indigo Nails product lines are for professional use only and are to be used for the purpose intended by a qualified and insured person of adult age. This means Indigo Nails will accept no responsibility if the products are incorrectly used and cause any harm or damage.

3 in stock

Have a question?
Categories: ,

Description

APPLICATION TIPS:

Stencil extensions:

 

  • Wash and disinfect hands, then put on gloves.
  • Assess the condition of the client’s hands and nails.
  • Clean the nail plate, remove cuticles with a nail pick or wooden stick.
  • Shorten nails as much as possible with a 180 grit file.
  • Roughen nails with a 100/180 grit file.
  • Remove dust from the nail with a soft brush.
  • Degrease the nail with a cotton swab soaked in Cleaner 1.
  • Apply the appropriate primer (Acid Free Primer or Acid Primer).
  • Apply a thin layer of your chosen base coat to the natural nail plate and cure for 30 seconds under a MultiLed lamp.
  • Adjust and attach the stencil
  • Spread a small amount of Take Your Time or Primo Ultimo gel on the plate and stencil and create a skeleton in the desired shape of the free edge.  Create in the Multiled 30-60 seconds.
  • Remove the stencil carefully.
  • Apply a portion of the chosen acrylic gel to the plate and spread it with the brush also on the free edge. Keep in mind the correct build up and consider the creation of a proper top arch, apex and hairline while working. From time to time, moisten the brush in Wipe Off cleanser so that it does not stick to the paste. Cure in a multilamp, depending on thickness and colour chosen: 30-90 seconds.
  • Repeat if necessary, taking into account the correct structure of the nail extension and cure in the lamp.
  • Remove the inhibiting (sticky) layer with a cotton swab soaked in Wipe Off Cleaner.
  • Shape the nail to the desired shape and curves with a 180/240 grit file.
  • Apply your chosen colour of Gel Polish or gel top coat and cure in a multilight 30 seconds.

If the product requires it, remove the inhibiting layer with a cotton swab soaked in Shea Super Shine Cleaner.

 

Cure the natural plate:

  • Wash and disinfect hands, then put on gloves.
  • Assess the condition of the client’s hands and nails.
  • Clean the nail plate, remove cuticles with a shovel or wooden stick.
  • Shorten nails as much as possible with a 180 grit file.
  • Roughen nails with a 100/180 grit file.
  • Remove dust from the nail with a soft brush.
  • Degrease the nail with a cotton swab soaked in Cleaner 1.
  • Apply a suitable primer (Acid Free Primer or Acid Primer).
  • Apply a thin layer of Protein Base to the natural nail plate and cure for 30 seconds under a MultiLed lamp.
  • Apply a portion of your chosen acrylic gel to the plate and spread with a brush. Be sure to build up correctly and consider the creation of a proper top arch, apex and hairline. From time to time, moisten the brush in Wipe Off cleanser so that it doesn’t stick to the paste. Cure in a Multiled lamp, depending on thickness and colour chosen: 30-90 seconds.
  • Remove the inhibiting (sticky) layer with a cotton swab soaked in Wipe Off cleaner.
  • Shape the nail to the desired shape and curve with a 180/240 grit file.
  • Apply your chosen colour of Gel Polish or gel top coat and cure in a multilight 30 seconds.

If the product requires it, remove the inhibiting layer with a cotton swab soaked in Shea Super Shine Cleaner.

 

 

Lamp Multiled 36W 

Acrylgel Pana Cotta 30g

60-90s

Go to Top